發晦氣
寫了篇文去 Asrock 度發晦氣
I have bought a new system with the 775Twins-HDTV motherboard. The windows xp installation disk cannot detect the SATA controller and is unable to install.
According to the FAQ, this can be resolved by pressing F6 during install and load the driver from floppy. The problem is that I don't have a floppy drive. I did some research and believe that there were several possible workarounds
1) Modify the txtsetup.sif file to load the driver (m5287.sys + ULiSATA.inf) during install and copy the file to the Windows XP installation directory. I can check and verify that the file is copied to the target location CORRECTLY. But when windows XP boots, 0x0000007B error occurs.
2) Add the driver to $OEM$ directory. The same result.
3) Use Linux + VMWare to perform a fresh install to the partition and install the driver. Afterwards, boot directly from the partition. However, the problem is that the driver refuse to install when it detected no ULi hardware.
Can you suggest a way to resolve any of the above problems? If not, I WOULD DEMAND ASROCK TO SPECIFY, HIGHLIGHT AND EMPHASIS REQUIREMENT OF FLOPPY DRIVE TO INSTALL WINDOWS ON A SYSTEM WITH THE MOTHERBOARD.
(0)